A table saw is the most recognizable power tool a carpenter owns for the carpentry and woodworking jobs.
Table saws are best-known for unlimited ripping capacity and versatility. Imagine you’ve got such a table saw in your workshop, but you can’t understand why they are called versatile as serves only a few purposes.
It happens with those who don’t know the table saw uses. With a handful of sawing hacks, you can turn the saw into a smart tool.
Only an experienced craftsman knows how to get the maximum benefit out of a table saw. If you don’t know the uses, this guide is for you.
[dpress_hr hr_margin=”15″ hr_bg=”#ffffff” /]
Most Common Table Saw Uses in 2021
The “most common” means a table saw can be as smart as serving you all-round sawing services. If you know the art of sawing, you know how smart a table saw can be.
Let’s have a look at what can you do with your table saw. I bet the following table saw uses will turn you into a smarter and avid craftsman overnight.
[dpress_hr hr_margin=”8″ hr_bg=”#ffffff” /]
1. Rip Cuts
The most common task of a table saw is the ripping cut – cutting wood to width. The powerful motor and sharp blade make it easier to cut a wider wood into a smaller piece. The table saw introduced a fence in this regard and almost all saws offer it with the saw. It helps to adjust the width of the cut combining with the saw blade. Once you set the blade for ripping, there is little chance to go wrong.
[dpress_hr hr_margin=”8″ hr_bg=”#ffffff” /]
2. Cross-cutting
Crosscut is cutting woods to length. If you need to cut any wood piece or board to length, get a well-advised table saw.A table saw gets the workpiece crosscut more efficiently than others with a sliding crosscut table guide.
Some carpenters prefer to buy a miter saw or a radial arm saw particularly for angle and miter cut. Luckily, you don’t need to do so. A table saw is good enough to provide such cuts with precision with a miter gauge.They feature a miter gauge for this purpose. Master to adjust the miter gauge to get an accurate angle cut before you feed the blade.
[dpress_hr hr_margin=”8″ hr_bg=”#ffffff” /]
3. Bevel Cuts
Table saws are engineered with a liberal setting to change the blade angle aiming bevel cuts. They feature a cast iron wheel underneath the table to change the direction of the blade by adjusting with the height of the blade to get a bevel cut efficiently. You can tilt the blade to a certain degree for the bevel cut.
In general, the most table saw is engineered with 0 to 50-degree bevel adjustment. Some of them use a right-tilt mechanism and some do left-tilt. It’s up to you what you prefer. Check the saw is function properly for tilting. Otherwise, you have to switch to a miter saw for this cut.
[dpress_hr hr_margin=”8″ hr_bg=”#ffffff” /]
4. Get the Finest Rabbets and Grooves Cuts
Rabbets and grooves cuts are made easy with a table saw. They’re commonly used to make joints. When you need to joint a portion with another, you can wisely use your table to cut a corner in a manner that suits the other similar piece. Before start cutting, secure the workpiece with clamps and dual-faced tap.
Although the table saw can make rabbets and grooves cuts excellently, they involve a couple of issues. Getting such a cut is a little bit tricky and the other is the cost. Along with being an experienced carpenter, make sure your saw has arbor to hold the complete dado set.
[dpress_hr hr_margin=”8″ hr_bg=”#ffffff” /]
6. Dado Cuts
If you think of making a cabinet or shelves, you’re quite fit with your table saw. You’ll require a few dado cuts for such an assignment. There are two commons dado types one is a through dado which goes through the entire length of the piece while the other is stopped dado. What the name suggests, a stopped dado cut stops before the edge of the board.
Unlike rip, miter and crosscuts, a dado cut is relatively complex. Getting such cuts efficiently from your table saw must require advanced sawing skills.A dado cut also is used to join pieces together like rabbets and grooves.
[dpress_hr hr_margin=”8″ hr_bg=”#ffffff” /]
7. Kerf Cutting
When the blade of the saw cut anything through the wood or remove anything from the surface is commonly referred to as kerf cutting. When you intend to do so, you have to pay quality attention to the width and the teeth of the blade during cutting.
While some carpenters use a handsaw for kerf cutting, the table saw is much easier and precise than a handsaw. What you need to ensure for kerf cutting is to cut through enough of the wood and monitor from the very close.
[dpress_hr hr_margin=”20″ hr_bg=”#018e03″ /]
Table Saw Uses: What to Keep in Mind
Table saw is known for its all-round performance. but the saw itself is nothing without the additional tools for safety and a variety of cuts. The following sections will shed light on such factors.
[dpress_hr hr_margin=”8″ hr_bg=”#ffffff” /]
Use the Right Blade
The aforementioned table saw uses require different types of blades for different cuts. If you aim for a cross cut, get an appropriate blade with 60 teeth or 80.Cross cut blade comes in smaller teeth.
If you intend a qualified rip cut, get a blade with up to 10-inch diameter. They tend to be larger and robust. The chisel-like teeth with profound recesses are easy to clean.
Beyond that, if you like to cut through plywood or melamine, find a blade that fits the cutting materials best. Similarly, invest for a blade based on the materials you like to treat efficiently.
Something else, you can end up with a carbide-tipped blade if you consider the combination of specialized performance and versatility together. They come with 40-50 teeth that make a satisfactory showing over an assortment of cuts and materials.
[dpress_hr hr_margin=”8″ hr_bg=”#ffffff” /]
Keep the Surroundings Clean
Keeping the surroundings and the tabletop clean is not only essential for the precision cutting, but also the quality of the pieces. If the surface of the wood gets dirty, it’ll later ask more sawing and sanding that would result in unnecessary decay of the wood.
Significantly, if the table is covered by sawdust, it’ll fade the line of cutting.The health complication is another alarming cause why you should keep them tidy and organized. Adopting a capable dust disposal system can leave you relaxed.
[dpress_hr hr_margin=”8″ hr_bg=”#ffffff” /]
Invest for A Dado Set
A dado set is a must-have supplementary tool for a table saw. You can make a variety of cuts with your table saw if you supplement a qualified dado set. You can’t expect to get rabbets or grooves cuts without dado blade. Though a qualified dado set will hike up to $300, it’ll return your investment with precision in the long run.
[dpress_hr hr_margin=”8″ hr_bg=”#ffffff” /]
Get a Fence and a Miter Gauge
For precise ripping, you need a capable fence. Set the fence along the blade arbor before you turn the saw on. The rip fence will provide the width of cutting that never lets you do mistake once you set the fence precisely.
[dpress_hr hr_margin=”20″ hr_bg=”#018e03″ /]
Summing Up
Once you go through this table saw information post, you’ll learn the most common table saw uses.
Just remember that almost every cut requires one or some supplementary tools. Make sure you have with you before kicking off the saw.
[dpress_hr hr_margin=”20″ hr_bg=”#018e03″ /]
You May Also Like:
Which Contractor Table Saw is Right for Me?
Band Saw Vs Table Saw- Which One is Better for You?
Table Saw vs Miter Saw: Which One is Better for You?
29 Different Types Of Saws And Their Uses (With Pictures)
[dpress_hr hr_margin=”20″ hr_bg=”#018e03″ /]
