Thetoolspick is reader-supported. When you buy via links on our site, we may earn an affiliate commission at no cost to you.

How to Change a Circular Saw Blade – 5 Easy Steps

When you prefer a circular saw, it means you crave to bring versatility and dynamism in your business. Most craftsmen manage the saw for their multiple businesses.

To qualify your circular saw for a variety of cuts and jobs with such wish in mind, you need to learn how to change a circular saw blade like a pro. You can’t get a versatile cutting from the saw if you can’t manage and prepare your saw by changing the blade for each cut.

While many fears of it, we find it a piece of cake. Want to know how?

How to Change A Circular Saw Blade – Step by Step Guide

How to Change a Circular Saw Blades

We put emphasis on learning all sawing hacks, learning how to change a circular saw blade is even more important.

In the following section, we’re going to don it telling you how you can manage it like a pro.

Required Tools for Changing Circular Saw Blade

  • Wrench
  • Blade

Step 1: Unplug the Saw or Remove the Battery

No matter what the variation of the circular saw you’re using, it might be either corded or cordless. The first thing you need to do is to unplug the power cord from the electric outlet if it comes with a corded option, or carefully remove the battery if it is a cordless circular saw and keep it somewhere. Otherwise, you may unconsciously turn on the saw and put you in a serious trap.

Step 2: Remove the Blade Guard

Now, put the saw on a flat surface or somewhere you feel comfortable to work with. Take a wrench and remove the blade guard conveniently to reach the blade directly.

Don’t apply force to open the guard. If the circular saw comes with an arbor lock, unlock it by pressing and keep rotating the blade. It’ll get engaged by now.

Step 3: Open the Arbor Nut

Engage wrench to open the arbor nut with the accompanying wrench keeping the blade in due position. Before rotating the wrench, make sure you’re well-acquainted with the variation of the saw.

Approach with the circular saw blade direction to open the nut if the saw is worm drive saw. And if it is from the direct drive circular saw, rotate the wrench in a counterclockwise manner.

Step 4: Replace the Blade

You’ve already separated the blade from the saw after you undo the arbor nut. Now fill the slot with a new blade sliding onto the arbor. Don’t tight the blade with your wrench.

Remember, if you tight the blade too much it’ll not rip properly. And I guess, you wouldn’t like it either. Just leave it tight enough.

Step 5: Give A Test Run

You’ve done the most of the process by putting the nut back in place. Now put the battery inside your circular saw, or plug the power cord into the electric socket. Give a test run and find if the blade is spinning satisfactorily.

Final Words

That’s the way we change the blade circular saw millions of time so far without facing any harm. Hope, you’ll never ask how to change a circular saw blade like a pro.

However, there might be tiny changes based on the type of the circular saw, but I believe you can improvise any situation you face after digesting these steps. What do you think?

New from the blog:

Which Track Saw is Right for Me?

Recommended Product for Your Safety:

George S. Battista
George S. Battista

George S. Battista is an ex-Marine. He proudly served the country and took his retirement 4 years ago. I know him since childhood. I think he is blessed with a creative mind. Click to Read More!

    Write a Reply or Comment

    Your email address will not be published. Required fields are marked *

    Track Saw Cordless Circular Saw Tile Saw Cordless Pole Saw