How to Clamp a Picture Frame

‘Clamping a picture frame is easy ’, someone in the woodworking industry can claim as such. But for a DIY enthusiast, the case may be a little different than that. Cutting down different parts and putting them together take a little practice to master. Whatever your case may be, you can learn the skills right here!

So, if you are still wondering how to clamp a picture frame, I will explain it here. 

Clamping a Picture Frame: Simple Guide

Clamping a Picture Frame

There are many ways to clamp a picture frame, and they all have their own benefits. Maybe you need it for one night, or you’re going on vacation and want to keep your kids from messing with the frames.

Clamping the picture frame is quick and easy, so it’s nice to know how even if you only do it once in a while. In this article, we’ll show you two different ways to clamp a picture frame. Let’s start…

How to Clamp a Picture Frame Corner

These instructions will give step-by-step directions regarding the proper process of clamping a picture frame using basic tools and more advanced techniques, such as welding equipment if necessary. This is perfect for beginners who want to learn the basics without having too much risk involved! Read below to find out more about this exciting process!

Here is the easiest method:

  1. Apply glue on each corner of the pieces of wood that you have already shaped and finished to make the frame.
  2. Put them together so that each corner evenly touches the other piece of wood.
  3. Use little picture frame clamps to secure every part together.
  4. Wait until the glue is dried and the frame is formed.

Note: Work only on two corners at a time. If you want to put all four pieces together at a time, chances are you will mess up everything. So, go one by one and take a few seconds to ensure the pieces are accurately aligned.

How to Clamp a Large Picture Frame

The earlier one might be regarded as the easiest method of clamping a picture frame, but this is not the only one. Besides, you can use this method only to clamp small picture frames. If you have to work on large picture frames, there is another way around it. Here is what to do:

Make Corner Clamps

Take a scrap piece of wood and draw lines separately to make four pieces of clamps. It takes a few steps:

  1. Draw lines on the piece of wood to divide it into four.
  2. Draw two triangles on each side using a speed square. In other words, you will have four triangles on the scrap piece of wood.
  3. Make holes where the triangles intersect. You can use a foster bit to drill through the marked points.
  4. Cut through the drawn lines using a miter saw. First, you must adjust your miter saw to cut at 45 degrees. Then, adjust the saw at 90 degrees to divide the piece of wood into four.

Thus you can easily make wooden clamps to make a large picture frame. But this is not the end of your task. You need to take a few more steps to clamp down your frame. Here is how:

  • Align the four pieces of the frame so that you can easily apply glue to them.
  • Apply glue on each side of the joint and then, attach the triangular piece of the clamp to the corner from inside the frame. Attach the other side of the clamp from outside the frame.
  • Use adjustable clamps to put them together securely.
  • Apply the same method on all four corners.

Note: Don’t apply much pressure on the miter clamps. Plus, make sure the pieces are perfectly aligned and clamped. 

Clamping a Picture Frame by Old Fashioned Way


What tools do I need to clamp a picture frame?

To clamp a picture frame, you will need various tools. To secure the clamps, you will need an edge clamp, corner clamps, spring clamps, and a hammer or mallet. Having a level to ensure the frame is straight before you begin the clamping process is important.

How do I make sure the frame is straight before clamping?

The most important step when clamping a picture frame is to make sure it is straight before clamping. To do this, use a level to check the frame from several angles. If the frame is not straight, use the corner clamps to adjust it until it is straight.

How do I know when the frame is clamped securely?

When the frame is securely clamped, it should feel solid with no movement. You should also be able to check that all of the clamps are securely tightened. If you can still move the frame with the clamps in place, you will need to pull them further.

How long should I wait for the glue to dry before removing the clamp?

Before removing the C-clamp, you should wait at least 24 hours for the wood glue to dry. This will ensure that the frame is secured correctly and that the glue has had enough time to set.

Final Words

If you’re looking for a way to hang up your favourite photos or maybe even make some of your own and display them around the house, then you’ll need to know how to clamp a picture frame. There are many different ways that it can be done, depending on what you have available and what kind of look you’re looking for.

I have mentioned two of the simplest ways of clamping a picture frame. However, this is not to say that there are no other ways around it. When you start working on something, you can magically find new ways to improve your job. But these are the common methods woodworkers and DIY enthusiasts use to clamp picture frames. So, start from here and you will find a lot more ways in the coming days!

Sharing is caring!

Leave a Comment

Your email address will not be published. Required fields are marked *