Are you looking for a unique tool for doing inlaying and routing jobs? Then, the Dremel rotary tool with various routing bits can be the right choice for you.
From DIY projects to the job site’s small-scale routing tasks, these multipurpose bits will offer you supreme convenience and comfort with their versatility.
But you need to know the proper way of using these amazing bits, and the good news is that now I will discuss how to use Dremel router bits. So, roll up your sleeves and keep reading…
How to Choose the Proper Dremel Router Bit
The selection process of Dremel router bits’ is straightforward; It includes picking a proper Dremel router bit specifically befitted for your intended work.
Keep in mind you will find several Dremel router bits in the shop, and each bit has been crafted uniquely. Always pick the appropriate one for gaining working comfort.
You may select the best Dremel rotary tool yourself according to your work because each version is different in speed. Also, the right Dremel machine and router bits combination produce wonder.
The Best Way to Use the Dremel Router Bits
Before you start your routing tasks, you must ensure that the bits must work separately during any job. I recommend practising with different Dremel bits to make the most out of these bits. As a result, you can be able to distinguish them by measuring their work performance.
Moreover, it would be best if you kept in mind that using these Dremel bits for any work other than their intended tasks may harm the workpiece or the bit itself.
The Process of Using Router Bits: 9 Simple Steps
Now, it’s time to see the easiest and safest way of dealing with Dremel router bits. So, without further ado, let’s dive into the procedure.
1. Taking safety precautions
Gloves and goggles are routing must-haves before starting any new projects. Gloves protect your hands from accidental cuts. Moreover, Goggles and face masks are essential if you do not want to breathe in wood or plastic particles. Also, put on a pair of earmuffs, and you’ll be safe and sound!
2. Ideal Materials
Softwood, rubber, and Plexiglass are excellent materials for handheld routers like Dremel. However, before you start any new project, let’s go through the basics. Always remember you should work on materials that are easy to root.
Therefore, you don’t need to worry while working with softwoods such as carbon, chipboard, fiberboard, laminates, plastics, Plexiglass, plywood, and rubber. With reduced speed, you can also apply Dremel handheld router bits on hard wheels.
3. Learn about the different route types
There are different kinds of routes that depend entirely on task types. If you are new to this field, you should learn one or two routing types and master them first.
For example, you can practice basic inlays on wooden tables, beds, boards, or kitchen countertops. Also, you can learn to make a circular groove. It is also called “Cove”. In my opinion, this is the simplest way to create attractive edges to a flat surface.
4. Take the right router bit
Figure out the right router bit for a perfect finish. So, let’s take a look at the bits offered by Dremel for this task.
A straight routing bit produces square-bottomed grooves, straight cuts, and trench grooves. If you want to get routes like chamfer and cove, you need to use piloted bits. Additionally, you can do decorative tasks with piloted beading bits; whereas rounded-over bits are perfect for making smooth edges.
A pilot bit is a guide that holds the bit in place and is suitable for routes like cove and chamfer. There are two main types. The first is a pilot bidding bit mostly used for decorative work.
You can also apply the V-notch bit for decorative tasks such as V-shaped grooves and narrow slots with the keyhole bit.
5. Insert the bit
After getting the ideal bits for your intended tasks, it’s time to insert the bits into its slot.
To do this, grab the bit with your right hand( if you are right-handed) and hold the Dremel tool with your left hand. Do the opposite if you are lefty. After that, lightly insert the router bit into the hole positioned on top of your Dremel rotary tool. This is basic for inserting all bits. However, ensure that it is correctly attached to its place and won’t cause any issues while spinning.
I think you’ll also love the latest router bits for sign making available from top brands.
6. Adjust the spinning speed
After successfully putting the router bit into the Dremel device, you should fix the spinning speed by rotating the switch until you achieve your desired speed. As a beginner, never set the machine at such a pace that you can’t control it smoothly while cutting.
7. Start the tool
Before switching on the power button, you should carefully read the instruction manual of the rotary tool. Ensure that the power outlet has the correct voltage to run the device. If everything is ok, press the power button to start the routing job.
8. Holding the Dremel router properly
This is simple, but if you accidentally fail to hold the Dremel tool firmly, you can damage your expensive workpiece. Also, ensure that you are not holding the device close to your body; it could lead to severe injuries to your body parts.
9. Turn off the Dremel router and store
After finishing your routing tasks, press the power button to turn the device off and wait until it stops rotating. Finally, remove the Dremel bit and clean the bit thoroughly with water. Make sure that you have safely stored the bit for the next projects.
Do you want to know what’s new for plug cutter set? Well, check out this post.
Using Dremel Router Bits
Final words
Congratulations, you have learned how to use Dremel router bits. Get your rotary tool, attach an appropriate router bit, and start decorating your workpiece with style. Practice regularly with different routing bits, and soon you will be an expert.
