There’s a whole lot of thing one has to consider before starting flooring or adorn the walls with their choice of tiles, but finding the right cutter might be the hardest.
You can’t make a mistake if you don’t want to regret your tile decorations later on.
Wet saw and tile cutter; the two choices often drive the DIY-er into an utter dilemma because nobody wants to ruin any of the expensive and beautiful tile pieces they’ll be using in the project, and this is why it’s better to do a little comparison first, to see which one goes better with the vision.
However, before comparing, let’s talk about the plan.
[dpress_hr hr_margin=”12″ hr_bg=”#ffffff” /]
Measurement is the Primary Concern
First of all, enter the room or ground you want to use the tiles onto. Take accurate measurements including the width, height, and area. Also, you must keep in mind that the flooring zone or upright wall can be not of the even size from each corner, so miter or curved cut might be required for your project.
After measuring the whole area, calculate the number of tiles that will be required for flooring or adorning the whole zone. And the grout lines that will go between, that has to be measured as well beforehand.
The type of tiles you want to use also plays a big part in the choice of the cutter. So, what material the tiles are made of, and how heavy or light they are going to be, has to be decided beforehand. And that’s also along with the budget.
When you’re done with planning the entire project, it’s time to check out which cutter suits the plan better.
[dpress_hr hr_margin=”12″ hr_bg=”#ffffff” /]
Also Read: Which Manual Tile Cutter is Right for Me?
[dpress_hr hr_margin=”12″ hr_bg=”#ffffff” /]
Tile Cutter
Tile cutter is the perfect cutter for beginners; the ones who are rookie or have no experience at all. The simple method of the cutter manually just scoring and snapping the tile in half is even easier in person than the demonstration depicts it to be.
Cutter does the job in a short time without any complication and does it perfectly without requiring any sort of energy. And what makes the experience even better is that it’s budget-friendly!
[dpress_hr hr_margin=”12″ hr_bg=”#ffffff” /]
Good Aspects
- You won’t require to spend a whole lot of money to buy this cutter.
- It doesn’t need the power to run, so you won’t have to always look for a power outlet near your working project to get started.
- Makes easy straight cuts without a mess.
- The cutter is portable so you can easily carry it out anywhere you want.
- The DIY-er doesn’t require to be heavily skilled to learn how to use it. Score and snap, it’s that easy!
[dpress_hr hr_margin=”12″ hr_bg=”#ffffff” /]
Cons of Tile Cutter
- Doesn’t work on every type of tile. For instance, if you try to score and snap a glass with a tile cutter, it will shatter instead.
- The cutter is too simple for scoring through heavy tiles.
- Works manually, so not a very effective choice for bigger projects.
- You can’t make a miter or curve cut.
[dpress_hr hr_margin=”20″ /]
Wet Saw
The saw is expensive, and it totally makes sense compatibility-wise. It comes with a diamond blade that can give you any type of cut you want. The way it’s usually set, perfect for straight cuts. Or you can rotate or adjust the blade a bit for miter or curve cut of your vision. Moreover, this saw works best for breaking tiles to fit the zone properly.
The wet saw works just how the name describes. It wets the surface of the tile to prepare it for cutting and scoring. Requires power for running.
[dpress_hr hr_margin=”12″ hr_bg=”#ffffff” /]
Good Aspects
- Can easily cut through hard and heavy tiles.
- Doesn’t break glass tile while cutting through it, perfect for the material.
- Includes a diamond blade that gives a precise cut fast.
- Running in power also contributes to fast cutting.
- Uses water to wet the tile surface before scoring to make the job easier.
- You can make miter or curve cut simply by adjusting or rotating the blade.
[dpress_hr hr_margin=”12″ hr_bg=”#ffffff” /]
Cons of Wet Saw
- Expensive and not fit for budget work.
- You have to be skilled first in order to be able to make precise cuts with the saw.
- Too heavy for transporting to place, so you have to fix a permanent spot for its placement and bring all the tile pieces to that spot for cutting them.
- The occurance of dust and debris is unavoidable.
- The place is bound to get wet because of the water application.
So, these are all the good aspects and cons of tile cutter and wet saw in a nutshell. Now, it’s for you to decide, tile cutter vs wet saw: which one to pick?
[dpress_hr /]
Conclusion: Tile Cutter Vs Tile Saw or Wet Saw
Both offer splendid features of their own and both are guilty of some limitations. But at the end of the day, the choice totally depends on the nature of your project.
If you want to get done within a small budget, and lack experiences, tile cutter is definitely your call. It neatly gets the job done, so you are goody-good unless glass tiles or tiles of higher PEI ratings are involved.
Want to get a nice cut in the first attempt and have to work with tiles in large batches on a much bigger project?
Then go for the saw with diamond blades if you’re skilled enough. It all comes back to whether the features are meeting your working conditions or not.
Hopefully, you will succeed to choose the right weapon for your battle.
[dpress_hr hr_margin=”20″ /]
